Sign In | Join Free | My burrillandco.com
Home > Nomex Needle Felt >

300gsm Metamax Nomex Needle Felt Asphalt Mixing Plant

    Buy cheap 300gsm Metamax Nomex Needle Felt Asphalt Mixing Plant from wholesalers
     
    Buy cheap 300gsm Metamax Nomex Needle Felt Asphalt Mixing Plant from wholesalers
    • Buy cheap 300gsm Metamax Nomex Needle Felt Asphalt Mixing Plant from wholesalers
    • Buy cheap 300gsm Metamax Nomex Needle Felt Asphalt Mixing Plant from wholesalers

    300gsm Metamax Nomex Needle Felt Asphalt Mixing Plant

    Ask Lasest Price
    Brand Name : HUADING
    Model Number : HD-ARANF
    Certification : ISO9001:2015
    Price : Negotiable
    Payment Terms : L/C, D/A, D/P, T/T, Western Union, MoneyGram
    Supply Ability : 200000 Square meter per Month
    Delivery Time : 10-15 Work Days
    • Product Details
    • Company Profile

    300gsm Metamax Nomex Needle Felt Asphalt Mixing Plant

    Nomex Needle Felt / Metamax Needle Felt / Asphalt Mixing Plant Aramid Filter Bags / Aramid Filter Bag Cloth


    Aramid filters offer one of the best total economies in a filtration system because of higher air to cloth ratios, higher temperature capability, and a long wear life.


    High Temperature Resistant Aramid Needle Felt & Nomex Needle Felt Properties:


    1) Performs at high temperatures
    Aramid Needle Felt can be used continuously at operating temperatures up to 218°C (425°F) , and can handle higher temperature surges. However, to optimize bag wear life, continuous temperatures of 204°C (400°F) and lower with minimum temperature surges are recommended.
    2) Resists flexing and abrasion
    Flex resistance of Aramid Needle Felt at room temperature is good, about equal to that of polyester fibers; after aging at temperatures of 121°C (250°F) and above its toughness if excellent. Aramid needle felt should give more than three times the wear life of polyester at 121°C (250°F) and above.
    3) Effect of moisture
    Aramid performs well at high operating temperatures with normal amounts of moisture. The wear life projections in the below graphs were developed using 6-10% H20. Higher levels of moisture and temperature shorten wear life. When operating in high moisture environments it would be worthwhile to investigate reduction of temperature to reduce wear life. For example with 20% H20, operating hours could be increased from 2,300 hours to 35,000 hours (15X) by reducing the temperature from 204°C (400°F) to 148°C (300°F).
    4) Resists Chemicals
    Aramid fiber resists attacks by mild acids, mild alkalis, and most hydrocarbons. In addition customers report it to be unaffected by fluorine compounds in gas effluent from metallurgical and rock processing operations.

    In acid environments, evaluation of Aramid needle felt should be made to ensure that the fiber will perform acceptably before insulation. Aramid Needle Felt is an acid environment, at temperatures above the dew point, will outperform polyester.

    Temperatures above the dew point should be maintained to minimize chemical attack on Aramid Filter bags and the equipment. The system should be warmed before putting on stream and dried before being shut down to minimize chemical attack. To optimize bad life when acid gases are present in the gas stream, the lowest operating temperature that is safely above the dew point should be used. Higher temperatures expedite chemical attack.

    5) Dimensional Stability
    Aramid Needle Felt Aramid Filter bags is one of the most dimensionally stable fibers available. Fibers of Aramid properly manufactured and finished, should neither stretch nor shrink over 2% when operated at temperatures up to 218°C (425°F).

    6) High temperatures
    The most effective use of Aramid aramid is in high efficiency filtering systems where effluent temperatures are above 250°F or in systems with surges over 250°F. In hot gas filtration systems, fabrics of Aramid Needle Felt require less filter area, for equal gas volume and efficiencies, than fiber glass.


    Avaliable on Any Requirements

    Capacity15,000 square meters per day (standard Aramid product)
    Diameter & Lengthcustomization accepted
    Optional WidthLess than 2.2 m
    Optional Thickness1.2mm ~ 20mm
    Optional Weight300g/m² ~ 650g/m² (±8%)
    Finish-treatmentCalendering, Heat setting, Singeing

    Physical and Chemical Properties

    Weight (g/sm)500
    Thickness(mm)1.8
    Width(mm)≤2.2m
    Finish treatmentSingeing, Calendering, Heat setting
    Air permeability(L/m2.s)200-300
    Tensile strength(N/5cm)warp≥1000
    weft≥1100
    Tensile elongation(%)warp≤20
    weft≤30
    Heat shrinkage(%)warp≤1.5
    weft≤1.0
    Temperature(°C/°F)Continue204/399.2
    Instant240/464
    Anti-acidGood
    Anti-alkaliGood
    Anti-abrasionExcellent
    hydrolysis stabilityMiddle
    Quality 300gsm Metamax Nomex Needle Felt Asphalt Mixing Plant for sale
    Inquiry Cart 0
    Send your message to this supplier
     
    *From:
    *To: Huading Net Industry
    *Subject:
    *Message:
    Characters Remaining: (0/3000)